Shengzhou Hongrui Refrigeration Technology Co., Ltd
Tel：86-13857581028 E-mail：hweif@139.com
01
2023
-
03
Air conditioning U-bend installation, installation method of air conditioning U-tube
Nowadays, many homes or public places are equipped with air conditioners, and it is absolutely impossible to do without air conditioners in hot summer. Air conditioners have indeed brought great changes to our lives and are also a type of electrical appliance that we often use. The installation of air conditioners is related to the use efficiency of air conditioners, so everyone should not ignore them. For example, the installation of U-shaped air conditioners, then let's explain the installation method of U-shaped air conditioners.
The purpose of installing the U-shaped pipe of the air conditioner is to avoid other debris entering the inlet and outlet pipes. The air conditioner will generate condensed water during the refrigeration process, so it is necessary to connect the drain pipe to smoothly discharge the water. During the process of connecting the drain pipe, we need to apply waterproof adhesive to the connection and wrap it with waterproof adhesive tape. Also note that the drainage pipe should have a certain downward slope, so that under the action of gravity, the water can be smoothly discharged to the designated location.
If you feel that the drain pipe is too long during installation, you can install an exhaust hole at a position less than 3 meters, in order to balance the pressure in the balance pipe and prevent water from flowing backwards. If there are many air conditioning drainage pipes that collect in the main drainage pipe, they should be staggered on each branch pipe for access, which can prevent condensate from flowing back. After completing the installation, my mother also needs to conduct a drainage test to ensure that the water pipes do not leak along the way.
It is also important to note that the outlet of the drain should not be placed in the sewer, nor should it be soaked in water, otherwise the odor may enter the indoor and outdoor areas, and it may also cause the condensate pipe to backflow indoors.
The main function of the U-bend of the air conditioner is to reduce vibration and reduce the severity of transmission of the compressor. However, the design of the U-bend varies with different brands of air conditioners. You can consult a professional about this issue. The above is the answer to this question, and I hope it can bring some help to everyone.
Next page
Quick navigation
Message Consultation
Contact person: Mr. Huang
Contact address: Floor 2, No. 26, Zhongyuan, Pukou Street District, Shengzhou City, Shaoxing City, Zhejiang Province
Tel：86-13857581028
Email：hweif@139.com
Fax：0575-83370155
Copyright © 2023 Shengzhou Hongrui Refrigeration Technology Co., Ltd. Powered by 300.cn Business license